What is Network Section in a Mobile Cell Phone?
Network Section in a mobile phone is the section that controls the incoming and outgoing phone calls. In a mobile cell phone the Network Section is controlled by the Network IC, PFO and the Antenna. The network section is divided into following 2 parts:
- RX – Receiving Section
- TX – Transmitting Section.
Types of Faults or Problems with Network in any Mobile Cell Phone
- There is no network in the mobile phone.
- There is less or weak network signal.
- Sometimes there is signal and sometimes there is no network signal.
- There is network signal for some time and then there is no signal at all.
Mobile Cell Phone Network Not Working Problem and Solution – How to Solve No Network Problem in any Mobile Cell Phone
- Manually search for network. If there is NO Network then there is problem in the Antenna Switch. Repair or Replace the Antenna Switch to solve the problem.
- If there is Network after Manual Search but the Home Network could not be selected then there is problem in the PFO. Repair or change the PFO.
- If the Network gets disconnected during phone call there repair or change the Network IC.
- Clean the Antenna Tips and Antenna Point.
- If there is still Network Problem then Heat or Change the 26 MHz Crystal Oscillator.
- If the problem is not solved then Heat or Change the Antenna Switch. You can also jumper if Antenna Switch is not available.
- Heat, Change or Jumper the PFO if the problem still persists.
- Heat, Reball or Change the Network IC.
- Heat, Reball or Change the Power IC.
- Heat, Reball or Change the CPU.
Note:
- If there is Low Network then Jumper the Antenna Socket. Refer to correct diagram to jumper.
- Check BSI of the Battery.
- If the problem is not solved by Hardware then Reload PM File in the Mobile Phone using the Software Box.
- In China Mobile Phones, if there is SOS Call, then copy SOS File from another similar mobile phone and reload it in the mobile phone with Network Problem.
No comments:
Post a Comment